Version 2.8.17 -- Added code to check for spurious APM suspend/resume events. -- Changed serial_cs driver to be more aggressive about finding IO ports for modems when the standard locations are all unavailable. Also changed the device name passed to cardmgr from the 'cua' device to the 'ttyS' device. -- Changed serial device script to expect 'ttyS' device names, and to create device files if needed. -- Changed network drivers to do more checking of if_port values. -- Fixed Configure script to recognize 2.0 kernels. -- Fixed probe.c and dump_i365.c to use the same probe logic as the i82365 module. -- Fixed mistake in the fix for the qlogic_cs driver for pre-2.0. -- Fixed interrupt allocation bugs in smc91c92_cs.c and pcnet_cs.c that goofed up Ositech and Linksys ethernet/modem combo cards. Version 2.8.16 -- Added 'ifport' command for selecting transceiver types for network adapters. Also cleaned up all the transceiver selection code in the various network drivers, and updated the HOWTO. -- Added support for Linksys ethernet/modem multifunction card. -- Cleaned up timer handling code in all the modules, for better platform independence. -- Added priority coding to all module printk()'s. -- Moved /etc/stab to /var/run/stab for consistency. -- Changed CIS parsing to tolerate errors in long link tuples. This should fix the New Media Net Surfer. -- Fixed modules/Makefile to work with pre-2.0.6 kernel. -- Fixed several bugs in the card status interrupt allocation code in the i82365 module, for supporting multiple controllers. Version 2.8.15 -- Updated Configure to handle 1.99.* (i.e., "pre-2.0") kernels. -- More changes to the socket-ignoring code. -- Added support for 3Com 3c562B, and Motorola Marquis cards. -- Fixed more SCSI problems with 1.3.98 and later kernels. -- Fixed Ositech problem in smc91c92_cs module. Version 2.8.14 -- Changed the socket-ignoring code so now it should work properly. -- Cleaned up some of the resource manager code. -- Added smc91c92_cs driver, for SMC, Megahertz, and Ositech ethernet adapters. -- Updated serial_cs to handle quirky Ositech multifunction cards. -- Fixed incompatibility with 1.3.98 and later kernels. -- Fixed bug in error reporting in cardmgr's config file parsing code, and fixed bug in config file. Version 2.8.13 -- One more fix for 1.2.X kernels. -- Added Fujitsu FMV-J181, FMV-J182 ethernet driver. -- Added mention of CONFIG_TR to HOWTO, also fixed Configure script and modules/Makefile to check for this before building ibmtr_cs.o. -- Changed core drivers so that if a socket contains a card that is already active when CS is loaded, it will be left alone... this should remove the need to use "ignore" with the socket drivers. -- Fixed bug in debug flag handling in modules/Makefile. -- Fixed modem support for IBM Home and Away Adapter. Version 2.8.12 -- Minor cleanup of multifunction card support. -- Added more CIS tuple definitions. -- Fixed (hopefully) the last 1.2.X kernel compatibility bug. Version 2.8.11 -- Minor updates to config file. -- Changed the pcnet_cs, ibmtr_cs, memory card drivers, and socket drivers to be architecture independent, for DEC Multia. -- Fixed to work with 1.2.X kernels again. Version 2.8.10 -- Added New Media Toast & Jam SCSI-only support. -- Added Panasonic KXL-D740 to supported cards. -- Added a new header file, ciscode.h, to keep track of manufacturer and product ID codes. -- Updated pcnet_cs to support the Longshine Ethernet card. -- Updated pcnet_cs and serial_cs to work with IBM Home and Away Card. -- Changed CIS handling code to work with the DEC Multia. -- Changed network scripts to handle NFS mounts. -- Fixed serial_cs to use ASYNC_SKIP_TEST: some PCMCIA modems don't pass the test, and it was always skipped for pre-1.3.72 kernels. -- Fixed risky parsing code in fixed_cs driver. -- Fixed error reporting bug in ibmtr_cs.c, added token-ring port range to config.opts. -- Fixed bugs in rc.pcmcia shutdown and cleanup code. -- Fixed two Future Domain/IBM SCSI typos. -- Fixed another rare CIS parsing bug. -- Fixed flags for Epson ethernet in pcnet_cs. Version 2.8.9 -- Updated for kernels up to and including 1.3.73. -- Made some drivers a bit less verbose. -- Changed PCMCIA startup script to clean up old devices after an unclean shutdown. -- Moved /tmp/.pcmcia-scheme to /var/run/pcmcia-scheme -- Added IBM SCSI and Future Domain SCSI2GO support. -- Added IBM Token Ring support. -- Added config entries for Accton 2216, CNet CN40BC, Epson ethernet, Raven CD-Note. -- Added true simultaneous ethernet/modem support for the 3c562 with 1.3.73 and later kernels. -- Fixed scsi script to not complain about nonexistent device files when shutting down devices. -- Fixed bug in cardmgr SCSI disk device name handling. -- Fixed bug in Configure script for 1.3.49 kernel with SCSI support. -- Fixed bug in nmclan_cs.c with 1.3.X kernels. -- Fixed umask bug in cardctl. -- Fixed obscure bug in CIS parsing for IO windows. -- Fixed ATA/IDE driver to be more flexible about choosing IO ports. -- Fixed race condition in 3c589_cs transceiver detection code, also fixed "missed interrupt" problem. Version 2.8.8 -- Made the scheme stuff more secure. -- Fixed serial driver to work better with 3c562... see HOWTO. -- Faster and better transceiver autodetection for 3c589 cards. -- Fixed debug-tools/Makefile to work when CFLAGS is set in the environment. -- Fixed kernel version parsing bug in Configure script. -- Fixed bug with unmounting multiple partitions in the "scsi" and "fixed" device scripts. -- Fixed modules/Makefile to include dependencies for objects built from source code in the Linux kernel tree. Version 2.8.7 -- Added NDC Instant-Link support. -- Fixed 3c589 transceiver selection problem, probably. -- Fixed bug in modules/Makefile with fixed_cs.o module. -- Fixed bug in cardmgr "resume" processing. -- Fixed network script to shut down BOOTP setups properly, and to handle some more special cases. Version 2.8.6 -- Cleaned up Makefiles. -- Changed the default debug level in nmclan_cs to 2, and got rid of the "checking if_port..." messages in 3c589_cs.c. -- Changed i82365 module to only probe for additional controllers if the "extra_sockets" parameter is set. -- Added Kingston, SCM address signatures to pcnet_cs.c. -- Added "beta" IDE/ATA driver. -- Fixed cardctl to have some functionality for non-root users. -- Fixed scsi_info to compile with 1.2.X kernels. -- Fixed the device scripts to set scheme to "default" if it is unset, and changed cardctl to do the same. Version 2.8.5 -- Tweaks for kernels up to 1.3.57. -- Modified device scripts to grab more info from /etc/stab. Now, all the device scripts pass an "address" to the corresponding option script, which can be used to tailor the configuration of specific devices. -- Added support for multiple PCMCIA configuration "schemes", such as home and work. There is an example in the HOWTO. -- Added 'scsi_info' utility for looking up SCSI device information, used by the SCSI device config script. -- Added automatic transceiver detection to 3c589_cs. -- Added "do_sound" parameter to serial driver, so that the speaker can be turned off if desired. -- Extended config file syntax so that config.opts can specify extra parameters for kernel modules. So, now, all local info should be in config.opts, and the main config file should be completely general. -- Changed i82365 and tcic drivers to automatically poll for card status changes when interrupts are scarce. -- Fixed reset problem in New Media ethernet driver. -- Fixed error reporting bug in pcnet_cs. -- Fixed bug in i82365 socket counting code for systems with just one socket. Version 2.8.4 -- Added support for DataTrek NetCard, config entry for Megahertz V.34 modem. -- Added '00 04 ac ...' signature for IBM cards to pcnet_cs driver. -- Added 'scsi.opts' file, where 1.2.X kernel users can list SCSI devices that should be checked when unloading SCSI adapters. -- Added more configuration options to network.opts, serial.opts. The network script now handles bootp, and nameserver configuration. -- Added a sanity check for results of the automatic IO port probe. -- Changed the installation for SysV-type setups to use /etc/pcmcia like everybody else, instead of /etc/sysconfig/pcmcia-scripts. -- Changed etc/Makefile to only update /etc/pcmcia stuff that has actually changed. -- Changed rc.pcmcia so that there are new PCIC_OPTS and CORE_OPTS environment variables for customization. -- Worked around 'insmod' bug: 'symbol=value' stuff silently fails when another symbol is a longer version of the intended one. -- Fixed bug in cardmgr, where it would only recognize the first device associated with a particular driver module. -- Fixed up memory_cs to work better with static RAM cards. -- Fixed possible kernel stack overflow problem in pcmem_cs module. -- Fixed bug in cardmgr include-file handling, which caused re-loading the config file to fail. Also fixed error recovery. -- Fixed bug in modules/Makefile that causes compiling the patched aha152x driver to fail. -- Fixed 3c589_cs driver's card recognition check. -- Fixed bug in dump_tuples and dump_cisreg that left extra device files hanging around in /tmp. Version 2.8.3 -- Fixed bug in Configure script, common symptom was deciding that CONFIG_MODVERSIONS was set when it wasn't. Version 2.8.2 -- Added '00 20 af ...' address signature to 3c589_cs driver. Version 2.8.1 -- A few dumb typo fixes. -- Extended config file format to support nesting files, split the config file, and the network and serial scripts into generic and local options. -- A fix for the New Media ethernet slowdown problem? Version 2.8.0 -- New way of passing device info from client drivers to cardmgr, to better support cards that may have several logical devices (i.e., SCSI, multiport cards, etc). -- Modified SCSI clients to identify attached devices, for 1.3.X kernels. -- Modified ftl_format to support reserving space for a boot image. -- Added code to automatically identify resource conflicts for IO and memory windows. Memory checking is not reliable, and disabled by default. -- Simplified the config file format, updated all the device control scripts. Added new script for managing SCSI adapters. The new scripts can determine if it is safe to remove a card, for all supported card types. -- Fixed the eject request code so that it correctly rejects requests when a device is in use. -- Changed shutdown code to make sure sockets are deactivated. -- Modified dump_tcic and dump_i365 to compile with Borland C++ under MS-DOS. -- Added Allied Telesis Ethernet support. -- Fixed module version checking problems with 1.3.39 and 1.3.40. Updated multicast stuff in 3c589 and nmclan drivers for 1.3.44. Tested with 1.3.43 and 1.3.45. -- Fixed bug in i82365 interrupt probe that caused the probe to goof up after a warm boot. -- Fixed bug in i82365 socket probe code. -- Fixed install procedure to handle Debian startup script layout, and fixed a bug affecting installs for System V style init scripts. -- Fixed pcnet_cs driver to respect CIS config entries for cards that seem to have valid info (fixes Grey Cell Ethernet). -- Fixed Qlogic driver to support Eiger SCSI adapter. -- Fixed Configure script and Makefiles to handle multi-word options properly. -- Fixed 3c589 driver to refuse to bind to non-3Com cards. -- Working on interrupt sharing for multifunction cards. Version 2.7.6 -- Fixed resource allocation bug that affected IO port availability after restarting cardmgr. -- Fixed typo in qlogic_cs module initialization. -- Fixed "kfree of non-kmalloced memory" bug associated with "flushing pending setup". -- Fixed a bug in SCSI driver unloading. Version 2.7.5 -- Made the configuration procedure a little more bullet-proof. -- Fixed bug in module version support for 1.2.X kernels. Version 2.7.4 -- Fixed 3Com 3c562 support in serial_cs and 3c589_cs. -- Fixed infrequent bug in alignment logic for IO and memory windows. -- Fixed various kernel incompatibilities, tested with 1.3.37 through 1.3.39. -- Fixed sizing bug in pcmem_cs. -- Fixed memory window setup bug in the TCIC-2 driver. -- Made the serial card driver slightly better at dealing with cards with not-quite-right CIS info. -- Revamped some of the module startup code, to facilitate optionally linking stuff into the kernel. Version 2.7.3 -- Changed default bus timing in i82365.c to 8.33 MHz. -- Fixed i82365 driver to deal with VG-469 3V/5V decision. Also changed probe logic to do a better job with docking stations. -- Updated pcmem driver. Added write for char device, fixed up seeking, etc, thanks to Don Wanigasekar. -- Changed pcnet driver to support reading the PROM to get a network card's station address. Verified with Linksys v2.00 card. -- Added support for multifunction cards that conform to the PC Card 95 standard. 3Com 3C562 almost works. Version 2.7.2 -- Consolidated most kernel version differences in "k_compat.h". -- Replaced de650 and ibmcc drivers with merged "pcnet" driver. Note that people will *have* to update their config files... -- Changed cardmgr to only load MTD's for memory-related drivers. -- Updated i82365.c to handle Vadem VG-469 controller, and to wake up Cirrus chips after a suspend. Version 2.7.1 -- Fixed typo in toaster_cs driver. -- Fixed module unloading in network drivers. -- Fixed problem with new timer behavior in 1.3.X. Version 2.7.0 -- New interactive configuration procedure. -- Updated to work with 1.3.X kernels. -- Fixed iflash2_mtd driver to work with IBM flash cards. Added more config entries for IBM, Maxtor flash cards. -- Fixed module building so that CONFIG_MODVERSIONS should work for all drivers, including the SCSI drivers. -- Fixed New Media Ethernet reset bug. -- Added stuff to cardmgr to support user specified actions during suspend and resume processing. -- Changed Makefile to build 8390.o on the fly. -- Fix to toaster_cs for CIS parsing problem. Version 2.6.3a -- Fixed dumb bug in de650_cs driver. Version 2.6.3 -- Another fix for 'kill -HUP' cardmgr. -- More flash, FTL fixes. Better error recovery in iflash2_mtd. Added man pages for ftl_format and ftl_check. -- Added support for "hardwiring" the hardware addresses for de650 type cards, if they can't be probed properly. -- Fixed "too much work..." problem with de650-type cards. -- Cleaned up suspend/resume a bit? -- First attempt at Adaptec/Trantor T460 driver. -- Changed interrupt scanning rules in i82365 and tcic drivers. Now, both drivers accept irq_mask and cs_irq parameters. -- Changed CS, cardinfo to properly update Vcc, Vpp for memory cards. -- Added support for Caldera installation. -- Added code to 'checkme' and modules/Makefile to decide whether or not to try building the t460_cs module. -- Added test to cardinfo to make sure it is setuid root. -- Took out some warnings about conflicting CIS tuples for memory regions. Version 2.6.2 -- Streamlined install procedure; moved etc stuff into separate subdirectory. -- First draft of Flash Translation Layer module, and FTL formatting tools (ftl_format, ftl_check). -- Fixed bug in resource allocation that sometimes causes bad things to happen when unloading modules or when restarting cardmgr. -- Updated Roger Pao's New Media ethernet driver to v0.14. -- Changed pcmem_cs to use memcpy() for block reads and writes. -- Changed de650_cs to use larger packet buffer on Socket EA cards. -- Fixed cardmgr 'kill -HUP' behavior. -- Updated some man pages. Version 2.6.1 -- Changed 'checkme' and docs to ask for kernel 1.2.8. -- Fixed bug in modules/Makefile -- Fixed bug in module version mismatch reporting. -- Fixed a couple of minor bugs in cardmgr. -- Fixed uninitialized variable bug in CIS parsing stuff in network drivers. Version 2.6.0 -- More robust handling of some i82365 timing parameters. -- Moved all CIS handling stuff from cs.c to cistpl.c. Added more CIS parsing, mainly for memory cards. Changed default for "strict_cis" to "off". -- Moved all the resource management stuff into rsrc_mgr.{c,h}, merged with the old mem_region.{c,h}. -- Added cs_internal.h for stuff shared between parts of pcmcia_core. -- Added support for Memory Technology Drivers. Added new sram_mtd, also added generic MTD-aware memory card driver, 'memory_cs'. -- Added MTD stuff to Programmer's Guide. -- Fixed bug in CS that prevented clean unloading of drivers that use memory windows. -- Changed i82365 module to detect Vadem chip in Vadem-Rev mode. -- Added MTD's for Intel Series 2 and Series 2+ Flash. -- Incorporated recent updates to Linux NE2000 driver into de650_cs driver. -- Fixed bad uninitialized variable bug in pcmem_cs. -- Added config entry for Adaptec APA-1460 SlimSCSI. Version 2.5.6 -- Fixed rc.pcmcia so that "stop" doesn't bomb if you're not running cardinfo. -- Added back a few modem config entries. -- Added version checking to all PCMCIA modules and utilities. -- Fixed bug in i82365 socket counting code. -- Fixed 'checkme' and HOWTO to give better info about version.h, added more network checks, better formatting. -- Clarified NE2000 instructions in HOWTO. -- Added support for KCI PE-520 Ethernet. -- Fixed bug in pcmem driver that could cause the first byte of a card to get scrambled. Version 2.5.5 -- Added function-based card identification to cardmgr. Deleted all modem card entries from standard config file. -- Added 'strict_cis' parameter to pcmcia_core module to control strict CIS parsing rules (default is turned on). -- Changed power-up sequence: reset will only be asserted after vcc_settle, reset timing tweaked to conform to standard. -- Fixed bugs in suspend/resume losing track of socket state. -- Added definitions for Ricoh controllers. Version 2.5.4 -- Fix for CIS long link tuple handling. -- Fixed CIS config table parsing bug in parse_irq(). -- Changed cardmgr so that wildcard product strings will match not-present strings. -- A few new sanity checks for 'make prereq' and 'make install-etc'. Version 2.5.3 -- Another fix to cistpl.c version string parsing. -- Another fix to CIS end-of-chain handling. Version 2.5.2 -- Changed cistpl.c to accept some non-conforming version tuples. -- Duh, took floating point code out of kernel modules. Version 2.5.1 -- Fixed bug in 'cardinfo' updating of device info. -- Changed defaults in i82365 module to disable irqs 12 and 15 for Cirrus chips. Also made interrupt scans more robust, and fixed probe for two controllers. -- More module unloading bugs fixed (ethernet, scsi modules). -- Fixed a couple of minor bugs in Makefiles, etc. -- Added more extensive CIS parsing, improved dump_tuples, added long link handling. Some error responses may have changed. -- Changed 'attr_speed' parameter to 'cis_speed', since code now also handles CIS stuff in common memory. Default changed to 300 ns. -- Added text to the Programmer's Guide describing new CIS stuff. -- Fixed suspend/resume problem where an empty socket isn't set up properly after a resume. -- Fixed race condition in socket initialization that could sometimes cause a card to be configured twice. Version 2.5.0 -- Verified with Linux 1.2.0 -- Added a lot of new text to the Programmer's Guide. -- Added Roger Pao's alpha driver for New Media Ethernet. -- Added %c% substitution for 'cardmgr' start/stop commands, to map to the card name. -- Rewrote Driver Services event handling to deal with more than one reader. Rewrote handing of eject requests so that cardmgr can clean up before a card is shut down. -- Added event report window to 'cardinfo' display. Made 'cardinfo' a setuid program so that regular users can run it to get status info, but not modify sockets. Added file locking to /etc/stab. -- Changed socket initialization sequence to conform to PCMCIA docs; should fix Megahertz 2144 modem and some suspend/resume problems. -- Changed interrupt mask code in i82365 and tcic to probe for working interrupt lines at startup time. Added ability for tcic driver to use irq 11. -- Fixed 'checkme' to do more SCSI option sanity checking, and to look in $LINUX/include/linux instead of /usr/include/linux. -- Fixed module unloading bugs in toaster_cs and qlogic_cs. -- Fixed bug in /etc/stab updating at card removal. -- Fixed Vpp display bug in cardinfo. -- Fixed power setting bug in GetSocket in i82365. -- Fixed serial_cs shutdown bug for case of two modems. Version 2.4.9 -- Minor fixes to HOWTO, Programmer's Guide. -- Included missing man pages for cardinfo, stab. Version 2.4.8 -- Added Maxtech Ethernet support. Added text to HOWTO for how to add support for any NE2000-compatible card. -- Fixed serial driver suspend bug, but it is still goofy. -- Added status beeps to cardmgr. -- Fixed Makefiles to include ${LINUX}/include, to better support systems with more than one Linux source tree. -- Made 'cardinfo' tool part of distribution. -- New man pages for /etc/stab, cardinfo. Version 2.4.7 -- Changed cardmgr to use uname() instead of /bin/uname. -- Moved cardmgr PID file from /var/pid to /var/run. -- Changed 'checkme' script to also work with ksh. -- Overhaul of suspend/resume and reset event handling. Goal is to fix trouble with cards not waking up after resume. -- Added some more tests to 'checkme'; now it creates 'xtra.options' to hold extra Makefile settings. -- Changed Makefile to autoconfigure rc.pcmcia using 'probe -m'. -- Added '/etc/stab' file output to cardmgr to hold current card info. -- Added more interlocks to shutdown code in de650_cs. -- Updated Qlogic driver for 1.1.93, for rev 1.10 card. Version 2.4.6 -- More fixes for Socket EA card, that should also fix Accton file transfer problems. Added 'delay_time' parameter to de650_cs. -- Fixed reset code for Compaq modem. New 'reset_time' parameter for pcmcia_core module. Changed default reset timing parameters. Version 2.4.5 -- Added support for EP-210 Ethernet -- Fixed Socket EA card, for real! Version 2.4.4 -- Changed Bus Toaster driver to use CIS tuples to pick IO addresses. -- Added 'wakeup' parameter to i82365 module for sleepy Cirrus chips. -- Fixed minor Makefile bugs. -- Fixed bugs in de650_cs for Socket EA card. -- Added 'mem_speed' parameter to ibmcc_cs module. Version 2.4.3 -- Fixed bug in PCI controller handling in i82365 module. -- Changed qlogic module to support turbo DMA. -- Increased tuple buffer in serial_cs for Toshiba V.34 modem. -- Added 'eject' and 'insert' commands to cardctl. -- Disabled Bus Toaster driver by default, since it is broken. -- Changed rc.sample to rc.pcmcia, added 'start' and 'stop'. -- Fixed interlocks between socket drivers and pcmcia_core. Version 2.4.2 -- Fixed several bugs in Qlogic, Bus Toaster SCSI drivers. Version 2.4.1 -- Fixed bug in TCIC-2 bus sizing code. Version 2.4.0 -- Changed default spot for cardmgr pid file to /var/pid/cardmgr.pid to conform to Linux standards. -- Converted FAQ to linuxdoc-sgml HOWTO format. -- More fixes for reset handling in cardmgr. -- 'cardctl status' will now report if a socket is suspended. -- When cardmgr gets a SIGHUP, it will reload the config file. -- Changed i82365 driver to handle multiple controllers better. -- Replaced old 'exclude=' options in i82365 and tcic with new 'ignore=' option to specifically ignore any one socket. The old option ignored sockets starting from 0. -- Cleaned up resource management stuff in cardmgr, so that SIGHUP will work properly, and no more "could not adjust resource" stuff. -- Fixed some device locking bugs in the memory card driver. -- Fixed small memory leak in CS resource handling. -- Wrote Programmer's Guide. -- Small fixes in cs.c and 3c589 driver for very fast systems. -- Added 'checkme' script and 'make prereq' target to check system for PCMCIA prerequisites. -- Fixed up module handling in cardmgr for dealing with several cards of the same type. -- Got rid of CONFIG_APM and CONFIG_PCI options -- they will be set automatically using /usr/include/linux/autoconf.h. -- Updated for 1.1.85 kernel. -- Fixed up Qlogic, Bus Toaster SCSI drivers. -- Kernel modules now installed under /lib/modules//pcmcia. Updated cardmgr to use the new module location. -- Changed cardmgr to bind anonymous card driver to unsupported cards whenever possible. -- Added more timing controls to i82365 and tcic modules. Implemented AccessSpeed for memory windows. Added attr_speed and io_speed parameters to pcmcia_core module. -- Added IO window attribute IO_DATA_WIDTH_AUTO for auto-sizing IO windows. Version 2.3.9 -- Changed default compile options for modules to include "-g". -- Added 'reset' command to cardctl. Made cardmgr more sensible about dealing with failed resets. -- Added device locking to pcmem_cs driver for "clean" suspend/resume. -- Cleaned up network driver shutdown code -- fixed "device still locked" message when drivers are unloaded. -- Fixed memory card size determination algorithm so that it doesn't return garbage for I/O cards. -- Cleaning up spurious interrupts when net cards are ejected: a new patch for 8390.c. Version 2.3.8 -- Fixed bug in 3c589_cs.c that prevented clean unloading. -- Fixed 3c589_cs.c to work with 3c589B cards. Version 2.3.7 -- Fixed bad bug in tcic.c. Version 2.3.6 -- Fixed 'exclude' bug in i82365 -- Update for Linux 1.1.72. -- Replaced 'status' with new 'cardctl' utility. Added options for suspending and resuming individual sockets. -- Added RPTI ethernet support. -- Added stuff to i82365 and tcic modules to fix interrupt selection. Also added flags for Cirrus controllers with optional features like status LED's, ring indicate, and DMA. Version 2.3.5 -- Fixed ifconfig problem in 3c589 driver. -- Fixed up PCI support some more. -- Fixed i82365 to handle VLSI with > 1 socket -- Changes for APM support. These include revamping the socket setup stuff in i82365 and tcic, and adding event handling to all clients. -- Changes for Qlogic SCSI support Version 2.3.4 -- Added support for Cirrus PCI controller. -- Cleaned up serial driver shutdown code. -- Added 'patches' subdirectory for useful kernel patches. -- Added PCMCIA-FAQ -- Added 'exclude=#' parameter to i82365 and tcic modules to better accommodate cards with point enablers. -- Fixed bug in dump_tcic -- mode register wasn't read correctly. -- Fixed TCIC-2 event handler problem Version 2.3.3 -- Fixed some TCIC-2 bugs. Version 2.3.2 -- Changed i82365 so if it is limited with a 'sockets=#' option, it will never touch any higher numbered socket -- for SCSI drivers with point enablers. -- More debugging code in i82365, tcic modules. -- Added stuff to 'cardmgr' to maintain a /etc/pcmcia/cardmgr.pid file. -- Fixed blocksize problem, module unloading bug in pcmem_cs driver. -- Fixed bug in cardmgr 'kill -HUP' handling (actually in Card Services) Version 2.3.1 -- Fixed TCIC-2 polling bug. Version 2.3 -- Major rewrite of low-level i82365 and tcic driver interface. Card status polling put in the low level drivers instead of pcmcia_core. -- Rewrite of low-level card status event handling. -- Better TCIC-2 register dump utility. -- DMA and speaker output control for TCIC-2, Cirrus controllers. -- Added signal handling to cardmgr -- Checked with 1.1.61 kernel. Version 2.2.10 -- Small fix in Vadem probe code. -- Fix for New Media hardware address probe. -- Cleaned up memory window handling in Card Services. -- Added a heavily-commented "skeleton" client driver Version 2.2.9 -- One more VLSI controller fix. -- Accton and New Media ethernet support merged into de650 driver. Version 2.2.8 -- Fixed handling of second socket with VLSI controller. -- Fixed event handling bug in ibmcc and pcmem drivers. Version 2.2.7 -- Added TCIC_SCF2_IDBR fix to tcic.c. -- Fixed bug in 3c589 interrupt handler. Version 2.2.6 -- Changed distribution to include lex and yacc output files. -- Added support for Vadem VG-468 controller. -- Changed i82365 code to support suspend/resume (sometimes, anyway). -- Fixes in TCIC-2 autodetect and event handling. -- Updated 3c589_cs driver to parallel changes to 3c509 driver. -- Changed all client drivers so they can be manually unloaded as long as their devices are not in use. -- Working on Accton EN2212 driver. -- Checked with 1.1.54 kernel. Version 2.2.5 -- Fixed event mask bug in ibmcc_cs, socket numbering bug in i82365. Version 2.2.4 -- Changed cardmgr to handle modules that take parameters. -- Minor cleanups of Makefiles. -- Better error handling for all Card Services stuff. -- Minor improvements in debug tools. -- Small fix in 3c589_cs driver. -- Checked with 1.1.51 kernel. Version 2.2.3 -- Added 'expert' flag (-x) to probe -- this does a somewhat risky but thorough search for a TCIC-2 chip. But, it doesn't work yet. -- Fixed bug in CS that prevented clean unloading of modules. -- Fixed 'kmalloc called nonatomically' bug in ibmcc_cs. -- Added extra test to i82365 to fix socket counting for some clones. -- Added write protect test to memory card driver. -- Man pages for cardmgr, config file, and drivers! -- Changed default config script to automatically link /dev/modem to a modem or serial card. Version 2.2.2 -- Added 'anonymous' card type to cardmgr, so that cards with no CIS information can be bound to the memory card driver. Version 2.2.1 -- Checked with 1.1.49. -- Minor install bug fixes. Version 2.2 -- Cleaned up README's Version 2.1.4 -- Added 'poll_delay' parameter to tcic module to control busy loop. -- Checked against 1.1.48. -- Fixed the shared-memory IBM CCAE driver. -- Removed (broken) IBM CCAE support from DE650 driver. -- Better Cirrus PD67xx register dumping in dump_i365 -- Minor improvements to trim down module sizes Version 2.1.3 -- Added preliminary shared memory driver for IBM CCAE cards. Version 2.1.2 -- Added setup of "misc" register for IBM CCAE cards. -- Cleaned up header files. -- Fixed pcmem_cs for 1.1.47. Version 2.1.1 -- Fixed network setup bug in config.sample. Version 2.1 -- Checked against 1.1.46 -- Added memory card driver, pcmem_cs, providing character and block devices for accessing PCMCIA card memory. -- Moved cardmgr from /usr/sbin to /sbin. -- Added 'sockets' parameter to i82365 for systems where the probe does not give the right answer. -- Added support for memory windows to CS. -- Working on support for IBM CCAE in de650_cs.c. -- Changed ds.c to relay major and minor device #'s as well as device names; now cardmgr can create device files on the fly. -- Changed tcic driver to support alternate base addresses for the TCIC-2 chip, via an 'insmod' parameter setting. -- Moved all configuration options to 'make.options', cleaned up the Makefiles, so that builds will be warning-free. -- Updated modules for 1.1.44. -- Cleaned up event handling in CS to make insert/removal detection more robust -- seems to help with MHz XJ2144. -- Fixed bug in cardmgr temporary device file unlinking that was causing /tmp to fill up with bogus device files. -- Fixed cardmgr to log messages on the console when syslogd is not running. -- No patches needed for 1.1.43 kernel! -- Added some hooks to CS so that it can be tweaked when you load it. -- Added sti()'s to all the CS interrupt routines, added more timeouts to hopefully lower chance of deadlocks. Version 2.0 -- Updated patches for 1.1.42 kernel. -- Major file reorganization: now all the pcmcia stuff is segregated in one directory tree. -- Changed device code in ds.c to grab the first free character device number. Also changed cardmgr to read /proc/devices to determine what device number was found. This eliminates the need for a kernel patch to include/linux/major.h. -- Moved the "improved" resource registrar code out of ioport.c and into drivers/pcmcia, since it seems unlikely to be adopted any time soon. -- Changed DE650 driver so that it will pick I/O ports aligned to a 32 port boundary between 0x300 and 0x400, since odd boundaries don't work. -- Fixed IBM modem test in serial driver so it won't bail on modems with incomplete CIS's. -- Working on simplifying configuration of 3c589 driver. Now you can set if_port from insmod: "insmod 3c589_cs.o if_port=#". This still isn't useful, because cardmgr doesn't allow arguments for modules. Version 1.7 -- Changed serial driver to actually use the ports specified in the CIS. This fixes Intel modems (and others??). -- Support for 3Com 3c589 ethernet! -- Support for IBM high-speed modems. Version 1.6 -- Updated patches for kernel level 1.1.38. -- Fixed serial driver to enable audio output. -- Added GetStatus call to Card Services, added to 'status' reports. -- Added 'probe' program to report PCMCIA controller type. -- Added 'dump_i365' program to dump Intel and Cirrus registers. -- Added 'dump_tcic' program to dump TCIC-2 registers. -- Added -DPOLL_STATUS option to cs.c, to support explicit polling of card status changes on systems where card insertion/removal irq's don't seem to work. -- Added 'dump_cisreg' program to dump CIS registers. -- Better card status change handling with TCIC-2 controller. Version 1.5 -- Attempt to fix card insertion/removal detection for TCIC-2. -- Installation bug fixes. -- Added 'tuples' program to dump CIS data. Version 1.4 -- Updated patches for kernel level 1.1.35. -- Fixed cardmgr to look in /sbin for the module utilities. Version 1.3 -- Alpha support for TCIC-2 controller. Version 1.1 -- Included missing cisreg.h header file. Version 1.0 -- First release.